No results were found for the filter!
Shocker AMP Dual Griff Set
Shocker AMP Grip Kits
Grip kits designed for your Shocker AMP - straight from the factory. With unparalleled fit and finish these grips are designed to make your Shocker AMP stand out from the crowd! The unique grip design allows all diagnostic holes to be...
39.95€ *
Shocker AMP Schrauben Set
Shocker AMP Screw Kit
Whether you just want to have a spare for everything, or your replacing a missing screw or pin, this kit has everything you need to replace each piece of hardware on your Shocker AMP. All fasteners used to secure the various...
10.95€ *
Shocker AMP Dichtung Set
Shocker AMP Seal Kit
Whether you just want to have a spare for everything, or your replacing a damaged o-ring or two, this kit has a full rebuild for your Shocker AMP. Factory o-rings are provided in specific materials and durometers to achieve maximum...
15.95€ *
Shocker AMP Ersatzteil: Augen, Solenoid Platine
Shocker AMP Solenoid/Vision Board
The Shocker AMP Solenoid/Vision Board is located on the body of the AMP. The Solenoid and the Vision System plug into it. Together with the Main Board this Solenoid/Vision Board enables the wireless connection between the gripframe and...
24.95€ *
Shocker AMP Ersatzteil: Hauptplatine (Export)
Shocker AMP Spare Part: Main Board
Shocker AMP Main Board SHK417 This is the main board for the Shocker AMP. This board is the export version (all fire modes) The acquisition and possession is permitted in Germany, but the installation and use may only take place abroad....
59.95€ *
Shocker AMP Ersatzteil: Solenoid
Shocker AMP Spare Part: Solenoid
Factory solenoid for Shocker AMP markers.
89.95€ *
Shocker AMP Ersatzteil: Augen
Shocker AMP Spare Part: Vision Harness
This is a full set of eye wires, plug, and sensors to replace the vision system in your Shocker AMP. Wether you have damaged a sensor, or torn a wire, these will get you back on the field ASAP! The Shocker AMP vision sensors are mounted...
19.95€ *
Shocker AMP Griffschalen, schwarz
Shocker AMP Stock Grips
The Shocker AMP stock grips in black
24.95€ *
Shocker AMP Griffschale Frontgriff, schwarz
Shocker AMP VReg Grips
The Shocker AMP Front grip rubber grips in black
19.95€ *
Shocker AMP/XLS Ersatzteil: Regulator Basis 2.0
Shocker AMP/XLS Spare Part: Regulator Base
Shocker AMP Regulator Base SHK226 The regulator base 2.0 as a spare part for the Vertical Regulator of the Shocker AMP and XLS.
12.95€ *
Shocker CC, AMP mechanisches Upgrade Set
Shocker CC, AMP mechanical conversion kit
Shocker Classic Conversion Kit The original Shocker ushered in the age of electronic paintball and now the legend has come full circle. Through progressive advancements each Shocker generation has become smaller, lighter and faster than...
214.95€ *
Shocker Detent Set
Shocker Detent Kit
The ball detents in the Shocker AMP, XLS and RSX are engineered for incredibly long life, and will likely never wear out. However, if your looking for piece of mind, or have a tendency to loose parts this detent kit will give you a full...
10.95€ *
Shocker Ersatzteil: Displayabdeckung inkl. Ein/Aus Knopf
Shocker Screen Cover & Power Button Kit
This is the improved display cover of the Shocker AMP including the power button. Also compatible with XLS and RSX models, so it can be used as an upgrade to better protect the on/off switch from the elements.
9.95€ *
Shocker Ersatzteil: Feedneckhebel Set
Shocker Spare Part: Feed Tube Lever Set
The feed tube lever for the Shocker AMP, XLS and RSX This spare part is the complete feed tube lever assembly for the Shocker consisting of: SSC006 OB9004 QLK206 QLK205 SHK133
19.95€ *
Shocker Ersatzteil: OLED Display
Shocker Spare Part: OLED Board
SmartParts Shocker OLED Board SHK118 The high-quality Oled display of the Shocker XLS and RSX. All the Shocker XLS or RSX settings can be read via the easy-to-read display. Easy installation through plug and play.
19.95€ *
Shocker Ersatzteil: Piston Dichtung
Shocker Spare Part: Piston Seat
Shocker Vertical Regulator Factory part: VRG106 VRG Piston Seat The seat is used within the piston as main seal area. If signs of wear are visible it is advised to change the seat. Insert it with the mushroom head first.
1.50€ *
Shocker Ersatzteil: Überdrucksicherung Inlineregulator
Shocker Spare Part: Pressure Relief Valve
This is the pressure relief valve which is installed in the Vertical Regulator of the Shocker AMP, XLS and RSX. This spare parts kit for the Shocker consists of: VRG107 SPL035 SHK130 SHK128
9.95€ *
Shocker Klemmfeed Rändelschraube
Shocker Thumbwheel Feedneck Screw
Grab this thumbscrew for your Shocker feed tube and make hopper adjustments even easier. This screw replaces your factory upper screw - SSC006 and allows you to clamp down on your hopper even tighter without the use of tools!
9.95€ *
Shocker AMP/XLS Ersatzteil: Regulator Piston 2.0
Shocker XLS Spare Part: Regulator Piston 2.0
Shocker AMP Regulator Piston SHK205 The Shocker AMP Regulator Piston as a replacement for the Vertical Regulator of the Shocker AMP and XLS.
9.95€ *
Viewed